威尼斯网上手机官网-首页

威尼斯网上手机官网是一家专业出产威尼斯正规官网、橡胶软接头、橡胶软连接、橡胶伸缩器等系列的厂家,我们致力于为客户解决管道连接问题,厂家直销,值得信赖.
24小时咨询热线

137-6120-9895

您此刻所在位置:威尼斯正规官网厂家 > 技术支撑 > 企业资讯 >
威尼斯网上手机官网-首页
联系我们

地? 址:上海市宝山区城银路525号

电? 话:137-6120-9895

电? 话:137-6120-9895

传? 真:021-64535755

技? 术:137-6120-9895

售? 后:021-64535755

手? 机:1376-1209-895

联系人:丁经理

Q??Q:1770058086

邮 箱:1770058086@qq.com

松夏针对橡胶软连接的安装做了哪些说明?

橡胶软接头又称威尼斯正规官网、橡胶柔性接头、软接头、减震器、管道减振器、减震器等。它是一种高弹性、高气密性、中阻、耐候的管接头。本产品具有橡胶弹性、高气密性、耐介质性、耐候性、耐辐射性等特点。采用高强度、高热稳定性、高温度的涤纶帘子布,经高温高压模压硫化而成。

Rubber soft joint is also called rubber joint, rubber flexible joint, soft joint, shock absorber, pipe shock absorber, shock absorber, etc.It is a kind of pipe joint with high elasticity, high air tightness, medium resistance and weather resistance.This product has rubber elasticity, high air tightness, resistance to medium, weather resistance, radiation resistance and other characteristics.Polyester cord fabric with high strength, high thermal stability and high temperature is vulcanized by high temperature and high pressure molding.

橡胶软连接

特点:内部密度高,压力高,弹性变形好。

Features: high internal density, high pressure, good elastic deformation.

优点:减震、降噪、重量轻。

Advantages: shock absorption, noise reduction, light weight, non - toxic.

用途:与泵、阀门连接,振动大的管道,热冷频繁变化的管道。

Purpose: pump, valve connection, vibration of the pipeline, hot and cold frequent changes in the pipeline.

适用介质:海水、淡水、热水、冷水、饮用水、生活污水、原油、燃料油、润滑油、成品油、空气、煤气、蒸汽和粒状粉末。

Applicable media: seawater, fresh water, hot water, cold water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, refined oil, air, gas, steam and granular powder.

DN40螺纹威尼斯正规官网

安装说明:

Installation instructions:

1、安装时严禁橡胶软连接。

1. Rubber soft connection is strictly prohibited during installation.

2、管道必须有固定支架或支架,固定支架的受力必须大于轴向力。在垂直和架空安装过程中,应在产品两端安装相应的固定支架和受力支架,以防在压力下将工作拉出。

2. The pipe must have a fixed bracket or bracket, and the force of the fixed bracket must be greater than the axial force.In the process of vertical and overhead installation, the corresponding fixed support and stress support should be installed at both ends of the product to prevent pulling out the work under pressure.

3、安装螺栓应对称地、逐步地拧紧,以防止局部泄漏。

3. Mounting bolts shall be tightened symmetrically and gradually to prevent local leakage.

KST-DN-65-1.6Mpa炼油厂用双球耐油橡胶防震接头


热销产品 了解更多+

威尼斯网上手机官网

上海市宝山区城银路525号

13761209895 传真: 021-64535755 手机:13761209895 QQ:1770058086

? Copyright 2019 威尼斯网上手机官网 All rights reserved XML HTML

微信二维码 微信二维码

威尼斯网上手机官网|威尼斯正规官网

XML 地图 | Sitemap 地图